- Ball-inflating needle for footballs, basketballs and more
- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm
• Compatible with Air Support HP, HP Pro, HV (429231, 429232, 429233, 429234, 429235)
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.
Renew all the seals in your Prestaflator spin head. These o-rings fit the seals, Plus there are five (5) Presta Valve replacement washers. Replace as needed for a good connection to your tire valve.
Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.
Replaces worn end on any pump hose. - Head Type: Schrader
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Renew all the seals in your Prestaflator tool. These o-rings fit the hose, Pressure Release button and Trigger Plunger on a Prestaflator tool. Kit also includes internal trigger-plunger washers for 2010 and newer Prestaflator tools. O-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. Updated 2013 Plunger seal is more reliable and gives the tool easier trigger regulation and retro-fits to 2010 and newer tools. Presta Head washers and rebuild kits are now sold separately.
• Secures frame pump to frame • Nylon • Also good for use as a watch band
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride, your pump will stay put. In addition to attaching pumps, the Pump Tie is also excellent for securing U-locks, fishing poles, and other delicate items that require a secure bond and a load-damping pad. - Dimensions: 1.5 x 10 inches - Weight: .5 ounces/14 grams
Mounting Kit for Mountain Morph and Turbo Morph G.
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Mounting kit for Mini Morph and Road Morph G.
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
Spare mounting bracket for 2018 Air Tool frame pumps.
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Allows you to reach into difficult places with your Prestaflator hose. Great for cleaning and drying parts on-or-off the bike. If the tip is blocked, The safety feature releases air away from your work so you can maintain control. Can also be used to inflate low pressure vinyl-valve items (beach-ball type). The safety release feature will help prevent over-inflation. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Note: The safety feature is only functional when the tip is used on a Prestaflator.
Use it to upgrade your floor pump or tankless electric inflator to use Prestaflator heads and accessories. Made with 6061-T6 Alloy – Strong as Brass and only 1/3 the weight. Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump’s hose.
Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
Replacement Composite Matrix pump mount for all High-Volume hand pumps (HV, Tech HV, Micro Floor HV/HVG, Alloy, Carbon Drives). Includes Velcro pump strap.
- 16g: Inflates 1 road tire to 120psi, inflates 1 MTB tire to 30psi
$6.59 - $6.99
Sunlite's Steel Frame Pump looks great on retro frames and modern road steeds alike. Its long steel barrel makes pumping up tires a breeze. And, it comes with mounting clips if your frame doesn't have a pump peg or your top tube isn't quite the right length.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
- High effeciency design - Lightweight composite construction - Thumb lock release - Reversible Presta/Schrader with bracket
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
These 16-gram cartridges can be used with Genuine Innovations' Second Wind MTB, Ultraflate and Proflate models as well as other cupped inflators.
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”
Planet Bike's 12-Gram CO2 Cartridge 3-Packs are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike Air Kiss, Red Zeppelin, Airship and other manufacturers' inflators that use threaded cartridges. The pack includes an insulator sleeve.
Planet Bike's 12-Gram CO2 Cartridge 3-Packs are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Airship and most other manufacturers' inflators that use unthreaded cartridges.
$8.99 - $99.99
Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy. - Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators. - Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2
Portland Design Works' 16 ounce Co2 Cartridges are threaded, work with most Co2 inflators that require threaded cartridges, and are food-grade so they're completely gentle and safe for your valves and tubes.
These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
Braid-reinforced PVC hose is stronger than Prestacycle's original Black hose from a few years ago, and also twice flexible! Schrader Spin-on head accepts all Presacycle Head, new and old. 200 psi working pressure, 13 inches length. Uses standard 1/4" threads. Non-marring and resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -30° to +125°F. Fits all previous Prestaflator tools, o-ring included.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Klic Co2 head/cartridge adaptor replacement
$9.99 - $21.99
20 grams of Genuine Inovations' exclusive size CO2 cartridge. Specifically designed for your larger volume 29ers, mountain and fat bike tires. These non-threaded CO2 cartridges work great with the Ultraflate (#G20310) and Full Metal Jacket (#G20440) inflators. Available in a 2-pack or 6-pack!
Lezyne's Dual Valve Pump Head is compatible with all high-pressure floor pumps and fits Presta and Schrader valves. Featuring durable composite construction and an aluminum locking lever, it's ready to pump when you are.
Lezyne's Slip Chuck is the perfect solution for getting to those hard-to-reach valve stems, especially on disc wheels. It's precision-machined from aluminum and is designed to fit Presta valves on deep-dish carbon disc wheels.
MSW threaded CO2 Cartridges fit all MSW inflator heads as well as other manufacturer's inflators.
$9.99 - $224.99
Planet Bike's 16-gram CO2 Cartridges are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Air Kiss, Red Zeppelin, Airship, and other manufacturers' inflators that use threaded cartridges.
- Comes with Dual Head - Compatible with all Planet Bike floor pumps - #1002-5 Auto head with hose can be used as a substitute for this item and is compatible with all pumps that used the dual head
If you own an Air-Bob inflator, you probably use it A LOT. When you finally wear out the original inflator head, no problem, here's the replacement part to get you back up and running.
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original lever, no problem, here's the replacement part to get you back up and running.
Sunlite's Model D Floor Pump has a 16-inch tall steel barrel for easy inflation and a sturdy base. The easy-to-use thumblock head fits all of your Schrader valve tubes.
• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps
Replacement hose kit for MSW AirLift floor pumps. - Smart head fits on both Presta and Schrader valves - Extra-long 48-inch hose - Barb-type hose connection
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Giant's Control Blast 16-gram Threaded CO2 Cartridges are the replacement cartridges for Giant's Control Blast and other inflators that accept this type (CO2 inflators sold separately). • Foam-padded cartridge provides insulation
- High-volume design with a durable alloy barrel - DuoHead Comp head fits Schrader / Presta - 100 psi / 7 bar maximum pressure - T-Grip handle - Frame bracket and mounting screws included - Length: 280mm
Page 1 of 8 Next page