Specialized's Air Tool Sport Floor Pump boasts all-steel construction, durable internals, a long hose, a sturdy handle and a three-sided base for easy pumping and excellent stability. You also get Specialized's SwitchHitter head that automatically adapts to fit Presta and Schrader valves, and an easy-to-read, 2-inch gauge to make dialing in the right pressure a breeze.

This durable frame pump with SwitchHitter head automatically adjusts for Schrader or Presta valve tubes and shows pressure on a rotatable gauge. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Gauge body rotates for easy viewing. - Durable plastic barrel with aluminum shaft to reduce flex and improve efficiency. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount Road or MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 33g

The new S-Works Carbon Rib Cage III keeps the 100% FACT carbon fiber construction of yesteryear, but it ups bottle retention for super rough roads. The split design also provides pre-load to hold bottles securely, while making bottle entry as easy as possible. - FACT carbon construction creates a splendid fusion of strength, optimal bottle retention, and light overall weight. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides secure bottle retention with easy in-and-out accessibility. - Weight: 24g

- Add to older versions of the SuperStand to extend height to accept 29er wheels

- Includes basket holder - Carrying handle for off bike use - Polyester powder coating - 11.75" x 8" x 9"

One of the best selling items in Wald's entire catalog, this basket set the precedent for quick-release convenience and is perfect for carrying small bags of groceries. - Made in U.S.A. (Maysville, KY) - This Quick Release Baskets comes with a detachable Slip-on Holder for simple installation - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14 x 9.5 x 9 inches; the basket tapers to 12.25 x x 7 inches - Holder is designed to fit 7/8" handlebar, hooks are 4 1/2" apart - Available in white (133WH) or black (133GB) Powder Coat Finish - Complete basket including the holder weighs 2.4 lbs.

This versatile basket is the most adaptable front basket Wald offers. - Made in U.S.A. (Maysville, KY) - Deep basket that is sized for a grocery sack - Dimensions: 14.5 x 9.5 x 9 inches; basket tapers to 12.25 x 7 inches - Extended handlebar clamps fit 7/8" and 1" diameter handlebars - Two-piece adjustable legs extend from approx. 14 inches to 22 inches and mount to either the front axle or fork eyelets for bikes with quick release front hubs - Available in gloss black (198GB) or white (198WH) Powder Coat Finish - Complete basket weighs 3 lbs.

This front basket system uses a bolt-on handlebar mount to allow for quick and easy removal of the basket itself. - Extended handlebar clamps allow greater clearance for shift and brake cables - Requires 3.5" of handlebar clearance for mount - Fits 7/8" to 31.8mm handlebars - Made in USA - Dimensions: 11.75 x 8 x 9"

This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.

The Wald 582 sets the standard for ingenuity when it comes to rear baskets. Mounting to the side of many rear racks, this nimble basket is the perfect size for packing 1-2 bags of groceries while balancing your load. When not in use, the base of the basket pivots up allowing the side walls to collapse. A simple clamp at the top keeps the basket out of your way when not in use. - Made in U.S.A. (Maysville, KY) - Baskets clamp to most rear racks up to 1/2" diameter - When not in use the base of the basket pivots up allowing the side walls to collapse making the collapsed basket 1" thick - A simple clamp at the top keeps the basket out of your way when collapsed - Extended basket is 12 3/4" front to back x 7 1/4" side to side x 8 1/2" deep - 582 Baskets have a Zinc Plated Finish; 582BL and 582WH Baskets have a Powder Coat Finish - Complete basket weighs 2.8 lbs.

- Steel wheels - For riders up to 100lbs - Fits 12" - 20" wheel bikes

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.

- The wrench is used to remove and install Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King bottom brackets - Small wrench is included for removal and installation of Shimano plastic bolts that are used on the Hollowtech II cranksets - Material: premium flex plus carbon steel, Surface finish: chrome plated according to ISO1456:2009

- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.

- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 - Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result

- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.

- 3/32" chain whip

- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT

- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6

- Electric repair stand is not just powerful, but also smart. It features endless height adjust, but it can also lift or descend a bike automatically with a push of a button. It also stops on its own when bike reaches the ground. - Endless height adjust, travel adjust limiters, internal routed cables - Equipped with Master shop repair clamp 1693.1M - Secures directly to the floor or on a heavy-duty metal fixed plate - Measurement: W750xL750xH2072 mm - Weight: 106 kg (with a steel fixed plate) - Load capacity: 400N (40kg)

- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting - Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads - Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

- 15 mm opening is laser cut with precision and perfect angle to help you loosen the pedals as easy as possible - 270mm of length for extra leverage - Small and light weight, perfect for toolbox and traveling

- The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.

- Quickly and accurately determine the wear and stretch of any chain

- Well thought out, extremely durable tool pallets organize and hold your tools in place. Pockets are designed with the size of our tools in mind. It also features a few extra pockets leaving you room to personalize your kit. - 48 pieces of our tools that are a perfect fit for a portable set, shop, home or team mechanics

Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position