Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Brompton 3-Spline Double Sprocket Set
Sprocket/Disc Set - 13T/15T - 3/32" - SRAM 6-SPD
Brompton 3-Spline Sprocket
Replacement sprockets. - Choose from 3-speed (1/8") or 6-speed (3/32")
Brompton 9-Spline Sprocket
Replacement sprocket. - Choose from 12T, 13T, or 16T
Brompton 9-Spline Sprocket Set
Sprocket/Disc Set 13T, 3/32": BWR 3-SPD (Wide Ratio)
Brompton Brake Caliper
Dual pivot calipers for front or rear applications.
Brompton Chain
Replacement chains in various lengths and widths. Includes PowerLink.
Brompton Chain Tensioner Complete
Chain tensioner complete. - Derailleur or non-derailleur options
Brompton Chainring And Guard
Chainring and Guard Assembly for 'Spider' crank in various sizes.
Brompton Crankset
Drive-side and non-drive-side arms, complete with chain ring. - 170mm crank arms - 3 chain ring size options: 44T, 50T, 54T - JIS taper
Brompton Folding Pedal Refelector Mk2 Silver
Folding Pedal Reflector Lens/housing MK2
Brompton Grips
Update your Brompton with new black grips. Fits M/H-Type handlebars. Suitable adhesive must be used. Not compatible with 2017 bikes.
Brompton Handle Bar Catch Kit
Handle bar catch set complete including spring, nipple, and fasteners.
Brompton Handlebar - M/H Type
Brompton handlebar for M/H type (pre-2017).
Brompton Handlebar - P Type
Brompton handlebar for P type.
Brompton Handlebar - S Type
Brompton handlebar for S type.
Brompton Pentaclip
The Pentaclip attaches your saddle to the seat post and fits standard sized saddle rails, so you can use a saddle of your choice on your Brompton. Adjustable to allow fine tuning of bicycle fit, the clip has a high and a low position for saddle placement, allowing you to a get a few more centimeters of height on any seat post length. The angle of the clip is also easily adjustable for perfect saddle pitch. Tools required: - 5mm allen key
Brompton Right Non-Folding Pedal
Pedal - Non folding - RH (Silver)
Brompton Saddle
Brompton Saddle with black rails. - Choose from Standard or Wide widths - Durable synthetic leather cover, internally stitched - Molded plastic under the nose, to aid carrying - Foam padding - Hollow rails - Compatible with the Cateye Rapid Mini for Brompton - The Brompton Pentaclip is not included, but available separately.
Brompton Saddle Height Insert
Customizable insert to create a lower stopping position for those who do not fully extend their seat post. Comes with full instructions. Tools required: - Scissors - 5mm Allen key
Brompton Seatpost
Replacement seatpost in Standard or Extended lengths.
Brompton Seatpost Stopper Bung
Replacement seat post bung
Brompton Suspension Block
Replacement suspension block. - Choose desired firmness: Standard, or Firm
Brompton Suspension Block Kit
Suspension block set complete including bolt and disc. - Choose from Standard or Firm hardness
Brompton Telescopic Seatpost
Telescopic steel seatpost.
Brooks Nylon Rain Cover
Our new Nylon Brooks Rain Cover protects your Leather Saddle from moisture. If a wet saddle is ridden not only the colour may stain your clothing, but the leather top may easily deform. The Nylon Rain Cover is an improved version of the tradiitonal Rain Cover, building on feedback provided by the Brooks Community. The Rain Cover is available in 2 sizes: REGULAR: ALL ROAD, MTB, TOURING AND TREKKING AND B66, B67, B72, B18 LARGE: B73, B190, B135, B33
Selle SMP TRK Lady
Upgrade your rides with Selle SMP's TRK Lady saddle. With their patented dropped nose design and large open center channel, the TRK eliminates pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for added life and the wider platform supports a more upright riding position. Soft polyurethane padding keeps you comfortable while the long rails provide ample fore/aft adjustment for the perfect fit.
Selle SMP TRK Man
Upgrade your rides with Selle SMP's TRK Man saddle. With their patented dropped nose design and large open center channel, the TRK eliminates pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for added life and the wider platform supports a more upright riding position. Soft polyurethane padding keeps you comfortable while the long rails provide ample fore/aft adjustment for the perfect fit.
Stages Cycling Cannondale Hollowgram Si
This Stages Power meter is built on to a non-drive Cannondale Si crank arm specifically to pair with Cannondale's Hollowgram Si crank — 2014 or newer. The Stages Power meter will also mate to the Hollowgram SISL2 model crank. This Stages Power meter is slimmer and up to 28% lower profile than their original meter. It's also sleeker, with a 17-percent reduction in frontal area, and they've made it stronger. The housing design increases the strength of the battery door and housing connection by 200-percent over the previous design. - Accuracy: ± 2% - Weight: Only adds 20gr to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Stages Support section - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Training Peaks, Strava, Garmin Training Center and others
Sunlite Head Bearing Lower
$0.39
Replacement bearing for the lower half of YST8003 #7 headset.
Sunlite Housing Ferrules
$0.39
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Sunlite Cable End Button
$0.79
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
AheadSet Universal Preload Bolt
$0.90
- Aheadset preload adjusting bolt
Cane Creek 10-Series Interlok Headset Spacer
$0.90
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Sunlite Stem Binder Bolt
$0.99
- w/Nut - 1-3/4-inch
Sunlite Stem Bolt
$0.99
- 8x1mm Allen head
Sunlite Sunlite Derailleur Clamp Bolt
$0.99
- Model: Replacement bolt - Compatibility: Allen, M5x16
KMC MissingLink Connector
$1.00 - $36.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Wolf Tooth Components 25mm B-Screw
$1.00
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.08
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Sunlite Adjusting Barrel
$1.19
- Aluminum w/lock nut - 18mm long/6mm O.D.
Sunlite Anchor Bolt
$1.19
- Replacement cable anchor bolt for brakes - Includes nut and washer
Dimension Anodized Bolt M5x.8 16mm
$1.25
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually
KMC 415H Connecting Link
$1.35
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
Sunlite Adjusting Barrel w/ Mount
$1.39
- Aluminum w/lock nut and mount - Slotted mount design
Sunlite Crank Dust Cap
$1.39
- Crank dust cap - Works with most three-piece crank models
Sunlite Hex Head Seat Binder Bolt and Nut
$1.39
- Chrome - Sold individually
Sunlite Seatpost Top Plate Bolt
$1.39
- M8 Top Plate Bolt
KMC Half Link Adapter
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Sunlite Derailleur Bracket Bolt & Nut
$1.59
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
Origin8 Rubber End Plugs
$1.70
Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.
Sunlite Lever Adjusting Barrel
$1.79
- For MTB levers - 7mm x 1mm - Aluminum construction
Sunlite Nylon Cable Guide
$1.79
- Routes cables underneath the bottom bracket - Will not rust or corrode
Hope 6mm Copper Seal Washer (Bag of 10)
$1.90
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Hope Copper Washer for 5mm or Stainless Line (Bag of 10)
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
Page 1 of 94 Next page