Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Cranksets

e*thirteen by The Hive TRS Race Crankset
$399.00
e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No
e*thirteen by The Hive e-spec Race Bosch Gen 4 Crank
$349.00
The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No
Vuelta Pista Cranks
$55.00
- Forged 7075 aluminum for durability and weight - 3/32" chain compatible - 46T aluminum chainring included - *Use with 107 or 110mm JIS Square Taper BB
Vuelta Pista Track 46T 144/BCD Crankset
$55.00
The Vuelta Pista Track Crankset is lightweight, reliable, and proven on the track. Look good, feel confident and go fast! - 144mm BCD - 1/2"x3/32" alloy chainring - 46T gearing - Fits square taper, 108mm bottom bracket - Cold-forged alloy crank arms - Available in 165 and 170mm lengths
TruVativ Descendant Crankset
$207.00
TruVativ's Descendant is a downhill bike specific crankset with amazingly strong forged 7050 aluminium arms. At just 822 grams, this remarkably tough package brings ultimate performance to everyone from freeride shuttlers, to slopestyle riders, to hard-charging gravity racers. Plus, the GXP bottom bracket with Gutter Seal Technology keeps out mud and dust.
TruVativ Descendant Troy Lee Designs CoLab Crankset
$449.99
Performance Creativity For the aficionados and the geeks and the fanboys and the freaks, a custom-painted crank is a place of pride. A painted hammer. A beautiful ax. Troy Lee and his team channeled the future of camo to design these cranks, and the future in the stiff, durable world of SRAM cranks is looking exceptionally bright. Specifications: - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Chainring Size: 32 - Crank Arm Length: 165mm, 170mm, 175mm - Chainline: 52.0mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD: Direct Mount (DM) - Crank Arm Material: Carbon
Specialized S-Works Carbon Mountain Crank Arms
$400.00
Sporting a supreme strength-to-weight ratio, Specialized's S-Works Carbon Mountain Crank Arms are super stiff and ready to propel you up the trails. With a self-extracting bolt for easy maintenance, these fourth-generation hollow crank arms feature an oversized aluminum spindle with a spline interface. It fits all frames with 73mm bottom bracket shell and includes all hardware for Pressfit 30.
Shimano Alfine S501 Crankset
$139.99
This 2-piece crankset with chain guard is perfect for city and commuter bikes. - Chainring: 45T, 42T, 39T - Single or double chainguard integrated design - Chain compatibility: Super Narrow HG for 9-speed, HG 8-speed (1/2 inch x 3/32 inch)
Shimano Alivio MT210-2 Crankset
$43.99
Kick your mountain biking into gear with the performance and durability of an Alivio MT210 crankset. - High-quality anodized finish - Precise and reliable shifting
Shimano Deore Hollowtech II M6000-3 Crankset
$132.99
Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. Its smooth shifting rhythm maintains speed and acceleration over challenging terrain and provides optimized gear combinations and ratios for trail riding. Features: - HOLLOWTECH II Crankset (3x10-speed) - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Close step tooth profile for smooth shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 50
Shimano Deore XT Crank (Double)
$230.99 - $234.99
- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arms : HOLLOWTECH II Technology - Bottom Bracket : BB-MT800 / BB-MT800-PA - Chain Line : 48.8mm - BB Shell Width : 68, 73mm
Shimano Deore XT Crank (Triple)
$247.99
- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-3 - Series : DEORE XT - Crank Construction : HOLLOWTECH II Technology - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Chain Line : 50mm - BB Shell Width : 68, 73mm
Shimano Deore XT Hollowtech II Boost Crankset
$234.99
Ride anywhere 11-speed rider tuned gearing. The power to choose how and where you ride. Consistent shifting performance and enhanced chain management. Optimal balance of durability and lightweight. High efficient and precise shifting. These cranks are Boost compatible. - Enhanced chain retention. - Better sealing and better rotation. - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - 4-Arm Chainrings : x - Chainring Sizes : 38-28T, 36-26T, 34-24T - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arm Length : 170mm/175mm - Chain Line : 51.8mm - BB Shell Width : 68, 73mm
Shimano Dura-Ace 9000 Left Crank Arm
$241.00
Shimano Dura-Ace Left Crank Arm. - Spindle Interface Type: Hollowtech II
Shimano Dura-Ace 9100 11-Speed Crankset
$624.99
- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
Shimano Dura-Ace R9100 Left Crank Arm
$232.00
Shimano's R9100 series crank arm achieves the ultimate in optimal power transfer. It does this through a broad Hollowtech II arm which sets the highest standards for stiffness and lightness. - Spindle Interface Type: Hollowtech II
Shimano Dura-Ace Track Crank
$474.99
Shimano's Dura-Ace Track Cranks transform every last watt into oval-scorching speed in the velodrome. These cranks set the bar for low weight and unmatched efficiency, with hollow forged aluminum crank arms and an Octalink bottom bracket (sold separately) for power transfer and acceleration that will blow you, and those trying to hold your wheel, away.
Shimano GRX RX600-10 10-Speed Crankset
$134.99
Shimano's new FC-RX600-10 crankset balances weight and efficiency for mixed-terrain riding. Gearing options cater to the specific demands of gravel riding and to provide tighter gear steps for maintaining pedaling cadence. The 2x10-speed crank is available in a 46-30T chainring combination. - Wider gear range for long tours or unknown terrain - Optimum gearing for mixed terrains and riding styles - Gear combination: 46-30T
Shimano RS510 Crankset
$154.99
The RS510 crankset features a 4-arm design that's light and stiff, providing high performance on a low budget. - For 11-speed drivetrains - Compatible with frames of O.L.D. 135 mm and 410 mm chainstay length - Affordable and high-end style crankset
Shimano Saint Crankset
$334.99
Big air, pure speed and total concentration: the DH world in a nutshell. It's a world where line choices are made in the blink of an eye, absolute faith in your gear is a must, and Shimano's Saint Crankset is ready to answer the call every time. Ultra-wide bottom bracket bearing spacing and hollow-forged crank arms are used for maximum rigidity and strength under demanding conditions, and a steel pedal insert adds even more burl. A single chainring keeps things simple and durable up front so you can focus on the ride, and not a dropped chain. See you at the bottom.
Shimano Tiagra Front Chainwheel
$144.99
Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB
Shimano Ultegra Crankset
$269.99
Low weight, efficiency, and speed: That's what Shimano's Ultegra Crankset brings to every ride. The proprietary four-arm design sheds grams and increases stiffness for more power straight to the road. Computer-designed chainrings with optimally placed ramps and pins are a revolution in front shifting with fast, smooth gear changes that set the standard. A wide range of gearing options and crank lengths offers you the opportunity to find the crank that suits your riding style.
Shimano Ultegra R8000 Crankset
$284.99 - $289.99
Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)
Shimano XTR Hollowtech II M9100-1 Crank Arms
$434.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 162mm Q-Factor
Shimano XTR Hollowtech II M9100-2 Crankset
$617.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Double front chainring set up - Combines wide range and close gear steps - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups
Shimano XTR Hollowtech II M9120-1 Crank Arms
$434.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 168mm Q-Factor
Shimano XTR M9120 Boost Crankset
$617.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Double front chainring set up - Special gear teeth profile designed for MTB riding usage - Crankset can be used as a common component - Smoother driving even over bumpy terrain - Lighter and stiffer design - Direct mount system enables easy chainring swaps - Q-factor: 168 mm - Chainline: 52 mm - Bottom bracket compatibility: Hollowtech II - 12-speed
Shimano ZEE Crankset
$134.99
Super strong and ultra durable, Shimano's ZEE Cranks are tailor-made for aggressive riders, DHers and dirt jumpers that don't have endorsement deals. They use a 2-piece design with solid aluminum arms as well as a steel axle and steel pedal inserts for longevity. Stiffness was put at a premium, so if you need to stomp on the pedals to get up to speed quickly, or if you're a Clydesdale who punishes lesser cranksets, ZEE has your back. It's 10-speed compatible and is equipped with a 36-tooth chainring. The bottom bracket is included, too.
SRAM Apex 1 Crankset
$128.00
- Chainrings Included: Yes - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 42-tooth
SRAM EX1 Crankset
$55.00
Lightweight, durable, stiff and designed specifically to work with Bosch and Brose mid-ship motors, SRAM's EX1 crankarms are purpose built for the high-torque E-MTB environment. - Proven SRAM technologies adapted for the demands of midship-motor E-MTBs - Compatible with Bosch, Brose and Yamaha bottom bracket interfaces - Arm Material: Aluminum - Colors: Black - Bottom Bracket Interface: ISIS
Page 1 of 4 Next page